What are the factors that affect the life of hydraulic motors?

Jan 16, 2021

The damage of the rolling bearing is a decision element that endangers the soft service life of the motor. The rolling bearing used in the motor is a unique rolling bearing capable of bearing special friction torque under special operating standards. Gear oil environmental pollution: This environmental pollution is mainly caused by human factors. When the hydraulic filter element is removed and replaced, the hydraulic oil in the filter cylinder is not drained or the hydraulic oil in the filter cylinder is not discharged. The air pollutants in the filter cartridge are immediately injected into the automobile fuel tank from the discharge inlet of the filter cartridge. When a particle over 10μm enters the motor, it will cause a scratch on the distribution surface. This scratch can become a pipe trench under long-term flushing with high-pressure hydraulic oil,hydraulic motor and this pipe trench can cause the motor invalid.

Cavitation erosion: When the server hydraulic oil pipeline and component connector have a small ineffective range in the sealing, the server hydraulic oil pump will suck in gas from the invalid position, so that the high pressure oil entering the motor contains bubbles Under the effect of hydraulic oil extrusion molding,hydraulic motor the air bubbles exploded and cracked in the motor cylinder body, resulting in cavitation of the engine cylinder. When the cavitation was more serious, it caused collusion between the copper layers of the valve surface of the engine cylinder. Another reason for sucking in gas is the small size of the hydraulic oil tank or the unscientific design of the spacing plate in the automobile oil tank. When the hydraulic transmission system pumps oil,hydraulic motor the bubbles in the hydraulic oil brought by the hydraulic transmission system are not completely solved, and they are pumped by the pump suction hole. go.

The motor speed ratio is related to the service life, performance, cavitation and noise of the motor. The selection of the motor speed ratio should be strictly in accordance with the data information of the technical requirements, and the larger speed ratio should not be exceeded. In the range of allowable speed ratio,hydraulic motor a better speed ratio consistent with the working conditions should be selected,hydraulic motor and the less speed ratio should not be less than 50r/min. The oil drain working pressure in the casing lies in the larger working pressure that the water pump seal can tolerate,hydraulic motor generally 0.2MPa. If the oil drain working pressure of the casing is too high, the water pump seal will be destroyed too early.

Connecting different shafts: When the non-parallelism between the belt pulley shaft and the motor spindle bearing exceeds 0 mm, the vibration caused by its high-speed operation will immediately be reflected on the motor machine spindle bearing, reducing the use period of the development of the rolling bearing at the front end of the spindle bearing. The natural working environment also affects the condition of the hydraulic motor. For example,hydraulic motor during laser cutting work, servers, CNC blades and sound card racks all cause great vibrations,hydraulic motor which all cause damage to hydraulic motor parts.

Inspection methods: All improper inspection methods result in the destruction of the hydraulic motor. The disassembly and installation of hydraulic motors is a meticulous and complicated work with strong professional ability. The maintenance personnel must carefully read the maintenance and operation instructions of the motor,hydraulic motor and adjust the gap of the negative pressure rolling bearing according to the technical specifications.


Send Inquiry