Reasons for low working efficiency of hydraulic motors

Jan 17, 2021

The reason for the wear of the hydraulic motor: After the hydraulic motor downloaded on the rig was overhauled,hydraulic motor it was found that the friction surface of the valve plate and the valve plate of the hydraulic motor was worn seriously,hydraulic motor with a depth of 0.15 mm; the output shaft oil seal was leaking.

The reason for oil leakage of the output shaft oil seal: After disassembly, inspection, measurement,hydraulic motor and test, the radial and axial gaps of the output shaft meet the requirements, and the mating surfaces of the output shaft and the oil seal have no significant wear. It is just that the oil seal vulcanized rubber becomes embrittled and hard,hydraulic motor and the ductility is worse. After the oil seal skirt is worn, the torque force and oil sealing characteristics decrease,hydraulic motor and the oil temperature is too high to accelerate the wear of the oil seal skirt; in addition,hydraulic motor the internal leakage of the hydraulic motor causes the back pressure in the casing to be too high,hydraulic motor which makes the oil seal Skirt wear and oil leakage are further aggravated. The smaller the frictional force of the motor rotor rotating in the motor stator sleeve,hydraulic motor the higher the mechanical efficiency of the motor.

The reason for the wear of the valve plate: Known from the principle of this hydraulic motor,hydraulic motor the valve plate and the rotor of the gyroscope motor are connected by a small linkage shaft to rotate together,hydraulic motor and the valve plate is dragged and rotated in the valve plate. Very large load is carried in the early stage of work, which increases the wear of the valve plate. The filter element of the hydraulic transmission system is ineffective so that the gear oil penetrates into the fine particles and residues. The small fine particles enter the friction surface during the whole process of the rotation of the valve plate, causing the friction surface to cause wear-resistant materials. The friction surface of the valve plate and the valve plate has worse roughness due to the wear surface,hydraulic motor which increases the residual storage space in the friction pair. The fine particles entering the friction surface and the metal material particles that are cut out rotate with the valve plate,hydraulic motor which increases the wear.


Send Inquiry